Marine Log In Information

Bronze Marine Rudder W/ Built In Rudder Log, Shaft Od: 54mm, Overall L: 825.5mm. Rudder Is Designed To Fit Azimut My And Multiple Other Vessels. The Sale Is Fob Fort Lauderdale, Florida.

Stainless Steel Marine Rudder W/built In Nibral Rudder Log And Tiller Arm . Rudder Is Designed To Fit Azimut My And Multiple Other Vessels.

Marine Stern Tube Shaft Log, Bronze With Compression Ring, No Hardware . The Sale Is Fob Fort Lauderdale, Florida.

Pontoon Boat Float Log Tube | W/ Strake 21 Ft X 25 Diameter Aluminum

Log Contains A Small Dent- See Photos. Hardware And Instruction Installation Manual Not Included. Sold As A Single. We're Your Port For Thousands Of Hard To Find Boat Parts, Original Manufacturer's Parts And Marine Surplus.

Custom 21 Foot X 27 Inch Diameter Pontoon Float Log / Tubes (single). Then There Are (7) Pairs Of 3" Wide Brackets Spaced With 21" Apart. Then There Is A 21 14" Space Followed By (2) Pair Of 2 12" Wide Brackets With A Spaced 18 34" Apart. Manufacturer Width 27". Width Of Bracket Pairs (1) 23 58", (7) 3", And (2) 2 12.

Custom 21 Foot X 24 Diameter Pontoon Marine Boat Float Logs / Tubes (single). We're Your Port For Thousands Of Hard To Find Boat Parts, Original Manufacturer's Parts And Marine Surplus. Check Out This Deal! This Log Features (2) Pairs Of 23 58" Wide Brackets At The Back Followed By An Approximate 23" Space.

Marine 1.75" Angled Bronze Shaft Log

Bronze Marine Rudder W/ Built In Rudder Log, Shaft Od: 50mm, Overall L: 120.77mm. Rudder Is Designed To Fit Azimut My And Multiple Other Vessels.

Pontoon Boat Log Float Tube | 21 Foot X 25 Diameter W/ Lifting Strake. Then There Is (1) Pair 3" Wide Brackets Followed By An Approximate 11 34" Space. Then Their Is (1) Pair Of 17 12" W Brackets Followed By An Approximate 13 34" Space. Then There Are (8) Pairs Of 3" W Brackets Followed By 13" L Space, Followed By A 13" Space, Followed By A 34" Space, Followed By (1) Pair Of 3" Wide Bracket.

Bronze Marine Rudder W/ Built In Rudder Log, Shaft Od: 54mm, Overall L: 825.5mm

Rudder Is Designed To Fit Azimut My And Multiple Other Vessels. The Sale Is Fob Fort Lauderdale, Florida.

Marine Bronze Shaft Log, 1.75" Id X, W/ Packing Gland And Packing .

Stainless Steel Marine Rudder W/built In Nibral Rudder Log And Tiller Arm . Rudder Is Designed To Fit Azimut My And Multiple Other Vessels.

Marine Stern Tube Shaft Log 60mm, Bronze With Compression Ring And Hardware

Marine Stern Tube Shaft Log, Bronze With Compression Ring, No Hardware

The Sale Is Fob Fort Lauderdale, Florida.

Marine 27" Long X 2.0" Id. Bronze Shaft Log . Marine 27" Long X 2.0" Id. Bronze Shaft Log.

Marine Bronze Shaft Log, 2-5/8" X 3-3/8" Bearing, W/ Stuffing Box And Packing . Bearing Size 2-58" X 3-38" Bronze Cutlass Bearing.

Bronze Marine Rudder W/ Built In Rudder Log And Tiller Arm, Oal: 895mm

Rudder Is Designed To Fit Azimut My And Multiple Other Vessels.

Weems & Plath The Cruising Log Of The Vessel In Teak Cover W/brass Plate

Wooden Cover In Excellent Condition. Other Pages Also Have Small Dark Spots Here And There. But In General, It Is In Great Condition.

Marine Bronze Shaft Log, 60mm X 80mm Bearing, W/ Stuffing Box And Packing . Bearing Size 60mm X 80mm Bronze Cutlass Bearing.

Bronze Marine Rudder W/ Built In Rudder Log And Tiller Arm. Rudder Is Designed To Fit Azimut My And Multiple Other Vessels.

Custom 21 Ft X 25 Diameter Aluminum Pontoon Boat Log Tube W/ Lifting Strake. Then Thee Are (7) Pairs Of 3" Wide Brackets, With 21" Spaced Apart. Then Their Is A 21 12" Spaced Followed By (1) Pair Of 21 12" Brackets, Followed By A 18 12" Space, Followed By (1) Pair Of 2 12" Wide Brackets.

Pyi 2114214 Pss 1 1/4"shaft X 2.25-2.5"log

The Stainless Steel Rotor Is Fit On The Shaft In Front Of The Carbon Flange. The Stainless Steel Rotor Is Used To Compress The Bellows Before The Collar Is Secured To The Shaft With Set-screws. The Stainless Steel Collar Is Sealed To The Shaft By Two O-rings That Are Recessed Into The Bore Of The Collar.

Bronze Marine Rudder W/ Built In Rudder Log And Tiller Arm. Rudder Is Designed To Fit Azimut My And Multiple Other Vessels.

Marine 1.75" Bronze Shaft Log .

Pyi 730-02100112 Pss 1" Shaft X 1.5"-1.75"log

The Stainless Steel Rotor Is Fit On The Shaft In Front Of The Carbon Flange. The Stainless Steel Rotor Is Used To Compress The Bellows Before The Collar Is Secured To The Shaft With Set-screws. The Stainless Steel Collar Is Sealed To The Shaft By Two O-rings That Are Recessed Into The Bore Of The Collar.

Bronze Marine Rudder W/ Built In Rudder Log And Tiller Arm, Oal: 895mm

Rudder Is Designed To Fit Azimut My And Multiple Other Vessels.

Nibral Marine Rudder W/ Built In Rudder Log And Tiller Arm. Oal: 1054mm

Oal 1054mm. Rudder Is Designed To Fit Azimut My And Multiple Other Vessels.

Pyi 2114200 Pss Seal 1 1/4"shaft X 2"log. The Stainless Steel Rotor Is Fit On The Shaft In Front Of The Carbon Flange. The Stainless Steel Rotor Is Used To Compress The Bellows Before The Collar Is Secured To The Shaft With Set-screws. The Stainless Steel Collar Is Sealed To The Shaft By Two O-rings That Are Recessed Into The Bore Of The Collar.

Bronze Marine Shaft Log Stuffing Box Self Aligning - 2" Shaft

The Sale Is Fob Fort Lauderdale, Florida.

Nibral Marine Rudder W/ Built In Rudder Log And Tiller Arm. Oal: 1054mm. Oal 1054mm. Rudder Is Designed To Fit Azimut My And Multiple Other Vessels.

Marine 1.75" Bronze Shaft Log

Marine Bronze Shaft Log 1-34".

Bronze Marine Rudder W/ Built In Rudder Log, Shaft Od: 50mm, Overall L: 120.77mm

Rudder Is Designed To Fit Azimut My And Multiple Other Vessels.

Weems & Plath The Cruising Log Of The Vessel In Teak Cover W/brass Plate

Wooden Cover In Excellent Condition. Other Pages Also Have Small Dark Spots Here And There. But In General, It Is In Great Condition.